[Gmecm] SEQUENTIAL Conversion FOR TPI

[Justin justin]

  Hey Bruce,

Thanks for the info.  I was also wondering how that cadillac 4.9 liter cam sensor was working out for you?  Is it just bolt in or is there some modifications you have to do to get it to fit?  Also is there any way you could send me a picture of the parts you pulled from the caddy setup?  Thanks - Justin
----- Original Message -----
From: bcroe at juno.com
To: gmecm at diy-efi.org
Subject: [Gmecm] SEQUENTIAL Conversion FOR TPI
Date: Tue, 3 May 2005 22:46:33 -0500

> 
> That is a cool idea.  Have you designed it to drive
> either saturated or peak/hold injectors?  Too late
> for me, I had to reshape 8 saturated driver output
> waveforms to drive my 79 Cad P/H port injectors.
> 
> I suppose if the original system fired injectors
> once per crank revolution, your system does the
> same (but with different phase per injector)?  If
> the original system fired injectors once per cam
> revolution (like my 79 Cadillac), your system
> does the same?
> 
> Are you selling just the cam sensor adapter to add
> to my existing HEI?  That would save me some
> trouble at the right price.  Complete distributors with
> cam sensors built in are already available (see
> rancefi), but around $400 is a lot when I don't need
> the whole distributor.  Any resembance between
> your cam sensor, and the Cad 4.9 HEI cam sensor?
> 
> I didn't know Einstein said that, but it makes sense.
> 
> Good luck with the prototype, Bruce Roe
> 
> 3 May 2005  "D.Pray" <dpray at cfl.rr.com> writes:
> > Our company has developed a sequencer that converts TPI (and 
> > other EFI systems) to sequential fuel injection.  It works with 
> > your existing ECM and
> > MEMCAL. We will be testing the prototype tomorrow.  The price is 
> > significantly lower than converting to a completely new 
> > controller.  Is there
> > any interest out there?
> >
> > The system can be viewed at:
> > http://www.bakengineering.com/page5.html
> >
> > Dwight Pray, Chief Engineer
> > BAK Engineering, LLC
> > www.bakengineering.com
> > tel:407-324-2907
> > fax:407-268-4874
> > When the solution is simple, God is answering. A. Einstein
> 
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm

-- 
_______________________________________________
NEW! Lycos Dating Search. The only place to search multiple dating sites at once.
http://datingsearch.lycos.com