[Gmecm] MECAL reprogramming

[Steve Ravet]

> -----Original Message-----
> From: gmecm-bounces at diy-efi.org 
> [mailto:gmecm-bounces at diy-efi.org] On Behalf Of David Allen
> Sent: Saturday, February 25, 2006 9:20 PM
> To: GM-ECM
> Subject: [Gmecm] MECAL reprogramming
> 
>   I will be needing to reprogram a Memcal before long.  I 
> have an extra one to "butcher" and modify for use with the 
> Romulator device.  When I get a bin that is satisfactory I 
> want to flash it into a non-modified Memcal.  What have you 
> "old timers" been doing for an adapter to plug a complete 
> Memcal into a chip programmer?

David, go to the gmecm page and click on FAQ, then "what do I need to
get started".

Also, if you do some reading on the diy-prom board at thirdgen.org
you'll find some flash or eeprom based modifications that eliminate the
need for UV erasing.

--steve


-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium.  Thank you.