[Gmecm] Back to square one

[Mike V]

At 06:29 PM 5/17/2006 +0100, you wrote:
>If I go with my DIY individual TBs and fit injector bosses to my existing
>DCOE inlet manifold runners, I plan to use some injectors from the engine as
>it was installed in the original vehicle (which had a single throttle body
>SFI system). The injectors are Bosch 280 150 427 - which an online lookup
>table rates at 240cc/min (22.95 lb/hour / 173 gram/min) assumed to be at
>~36PSI (2.5 BAR).

Get something close.  The exact part number isn't required.
MV