[Gmecm] IAC / AIS Setup - $8D/7730 )

[Gary Evans]

I do have VSS input - it happened anyway. Never had the problem with  
the sky high idle, but I am running $A1 code which might be the  
difference.



On Apr 5, 2007, at 1:15 PM, Tomas Sokorai wrote:

> On 4/5/07, Gary Evans <gary at garyandliz.com> wrote:
>> I agree with Duncan - I had a similar expereince with my setup (dual
>> 3.1 ecms on jag V12). The car would sometimes stall during decel
>> because IAC counts could drop too low while the car was moving.
>
> I had that problem in a BMW I6 with '7727 + $8D setup. It's because
> you don't have proper VSS input.
> I ended doing the IAC setup, so the idle was almost my desired idle
> too because a VSS was too difficult to install.
>
> The only problem I couldn't solve, is the sky-high idle when you stall
> the engine and then try to restart right away.
>
> -- 
> Tomas J. Sokorai Sch.
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
> Main WWW page: http://www.diy-efi.org/gmecm