Hessitation in Late Model Subarus

[Gary Derian]

I did this when I had a Buick 215 in my Vega.  I mounted a magnetic sensor
from an old Corvette transistor ignition in the Buick dizzy and an HEI
module mounted to a heat sink behind the headlight.

Gary Derian <gderian at oh.verio.com>


> This might be of interest.  GM uses an externally mounted ignition
> module.  The module and coil are connected to an aluminum plate.  I've
> seen this on 93+ Corvettes, 96+ pickup trucks.
> Shannen
>
> G. Scott Ponton wrote:
> >
> > Don,
> >
> >     The system should be fairly easy for you to impliment. The problem I
had
> > was fitting an HEI behind a Tripower intake. With the rear carb so far
back
> > there  wasn't room for an HEI distributor. So I had to manufacture my
own
> > and mount the rest of the HEI circiutry to a heat sink mounted
elsewhere.
> >     Unless the rest on the list are willing to read all of this I think
it
> > may be better if we took the discussion "off list" and save the
bandwidth.
> >
> > Scott