Misc Electronics / barrier coat / reverse cool.

[Todd....!!]

Please do...

Am very interested in this stuff...

Todd....!!

Shannen Durphey wrote:
> 
> Bruce Plecan wrote:
> >
> > Just for grins, we barrier coat the piston domes
> > the intake valve face, the exhaust valve face.
> > In theory then we have captured more heat to be recovered by the movement of
> > the piston, right??.
> > Now that we have with held this higher heat, for a longer period of time,
> > then more
> > heat is put into the top of the cylinder bores, right.....
> >   The cooling system was designed so that the exhaust valve seat area is the
> > "hot spot",  so don't we now have to "reverse" cool the engine to get the
> > max effectiveness out of this??..
> > grumpy
> >
> I can tell you this:  Takes longer for car to reach operating temp on
> the gauge (sender in LH head) than any other car I've owned, with this
> coating installed.  I'll let you know what the chambers and pistons
> look like when I pull the heads off, as far as possible heating goes.
> Shannen