May 2005 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue May 3 14:04:38 UTC 2005
Ending: Tue May 31 19:05:36 UTC 2005
Messages: 165

• [Diy_efi] [ot] Diahatsu Move 1995 - reading the ECU diagnostic codes ?   Andreas Bernhard
  • [Diy_efi] [ot] Diahatsu Move 1995 - reading the ECU diagnostic codes ?   Bobby Yates Emory
• [Diy_efi] Strain gauge on engine mounts   John Gwynne
• [Diy_efi] coil per cylinder on a smallblock project   Robert Fleming
  • [Diy_efi] coil per cylinder on a smallblock project   Steve Ravet
  • [Diy_efi] coil per cylinder on a smallblock project   Robert Fleming
  • [Diy_efi] coil per cylinder on a smallblock project   Scott Pearson
  • [Diy_efi] coil per cylinder on a smallblock project   Robert Fleming
• [Diy_efi] Motorola datasheets   vg30dett at portugalmail.com
  • [Diy_efi] Motorola datasheets   Paul Bidmead
  • [Diy_efi] Motorola datasheets   WSCowell at aol.com
• [Diy_efi] Motorola MEMS ECU Info   Gary Fraser
  • [Diy_efi] Motorola MEMS ECU Info   WSCowell at aol.com
• [Diy_efi] Motronic   hoshy at hoshy.co.uk
• [Diy_efi] OBD II cable "   MATOSINHO
  • [Diy_efi] [ot] Twin tyres on ebay   niche at iinet.net.au
    • [Diy_efi] [ot] Twin tyres on ebay   Randy Bailey
      • [Diy_efi] [ot] Twin tyres on ebay   niche at iinet.net.au
      • [Diy_efi] [ot] Twin tyres appreciated   Ernest Buckler
      • [Diy_efi] [ot] Twin tyres appreciated   Bobby Yates Emory
  • [Diy_efi] OBD II cable "   David Cooley
    • [Diy_efi] OBD II cable "   Bobby Yates Emory
      • [Diy_efi] OBD II cable "   David Cooley
  • [Diy_efi] OBD II cable "   Rick McLeod
• [Diy_efi] fuzzy logic   David Gravereaux
  • [Diy_efi] fuzzy logic   Phil Lamovie
    • [Diy_efi] fuzzy logic   niche at iinet.net.au
• [Diy_efi] tuning question   Tim Marsteiner
  • [Diy_efi] tuning question   Michael Richards
  • [Diy_efi] tuning question   Tim Marsteiner
  • [Diy_efi] tuning question   Tim Marsteiner
    • [Diy_efi] tuning question   Michael Richards
    • [Diy_efi] Re: standard Motec curve and the Hydra EMS curve   Phil Lamovie
      • [Diy_efi] Re: standard Motec curve and the Hydra EMS curve   Tim Marsteiner
  • [Diy_efi] tuning question   Tim Marsteiner
    • [Diy_efi] tuning question   Michael Richards
• [Diy_efi] newbie questions (m)   R P Davis
  • [Diy_efi] newbie questions (m)   Daniel R. Nicoson
• [Diy_efi] RE   R P Davis
• [Diy_efi] Re: [Wbo2] Newbie questions   R P Davis
• [Diy_efi] need odb1 pcm changed   Jim Butterfield
• [Diy_efi] A/F mixture, EGT and engine damage   Tim Marsteiner
  • [Diy_efi] A/F mixture, EGT and engine damage   Michael Richards
  • [Diy_efi] A/F mixture, EGT and engine damage   Tim Marsteiner
    • [Diy_efi] A/F mixture, EGT and engine damage   David Cooley
      • [Diy_efi] A/F mixture, EGT and engine damage   gary
    • [Diy_efi] A/F mixture, EGT and engine damage   Michael Richards
  • [Diy_efi] A/F mixture, EGT and engine damage   Don Sauman
  • [Diy_efi] A/F mixture, EGT and engine damage   Tim Marsteiner
    • [Diy_efi] A/F mixture, EGT and engine damage   gary
  • [Diy_efi] A/F mixture, EGT and engine damage   Adam Wade
  • [Diy_efi] A/F mixture, EGT and engine damage   Tim Marsteiner
  • [Diy_efi] A/F mixture, EGT and engine damage   Adam Wade
  • [Diy_efi] A/F mixture, EGT and engine damage   Tim Marsteiner
• [Diy_efi] swap part questions   Steve Ravet
  • [Diy_efi] swap part questions   Chris McKinnon
  • [Diy_efi] swap part questions   Mike V
    • [Diy_efi] swap part questions   David Allen
  • [Diy_efi] swap part questions   Steve Ravet
    • [Diy_efi] swap part questions   Mike V
  • [Diy_efi] swap part questions   Steve Ravet
    • [Diy_efi] swap part questions   David Allen
• [Diy_efi] injector sizes 1998 vortec 454   Brendan Patten
  • [Diy_efi] injector sizes 1998 vortec 454   Scott Peitzsch
    • [Diy_efi] injector sizes 1998 vortec 454   Jim Butterfield
• [Diy_efi] Introduction   John Christensen
  • [Diy_efi] Introduction   Rick McLeod
• [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Marcello A. Belloli
  • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   mark krawczuk
  • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Andrew Hopton
    • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Mike
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   gary
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Daniel R. Nicoson
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Mike
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Daniel R. Nicoson
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Mike
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Murray Gill
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Marcello A. Belloli
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Mike
      • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Andrew Hopton
  • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Steve Ravet
    • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Marcello A. Belloli
  • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Steve Ravet
    • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Mike
    • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Marcello A. Belloli
  • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Adam Wade
    • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Mike
    • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Marcello A. Belloli
  • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Gianmarco Rizzo BE/EAS
  • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector?   Adam Wade
• [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector   Robert W Hughes
  • [Diy_efi] Measuring Pulse Width/Duty Cycle of an Injector   Mike
• [Diy_efi] DTC 11 and 34   Pablo Lamsis
  • [Diy_efi] DTC 11 and 34   vg30dett at portugalmail.com
    • [Diy_efi] DTC 11 and 34   Mike
• [Diy_efi] Re: Diy_efi Digest, Vol 3, Issue 13   Pablo Lamsis
  • [Diy_efi] DTC 11 and 34   Mike
    • [Diy_efi] 8051 series chip with lottsa PWMs and 12 bit adc :o)   Mike
• [Diy_efi] Speed Density EFI adaptable to V-Twin?   Kalmbach, Kevin D
  • [Diy_efi] Speed Density EFI adaptable to V-Twin?   Adam Wade
  • [Diy_efi] Speed Density EFI adaptable to V-Twin?   Gianmarco Rizzo BE/EAS
  • [Diy_efi] Speed Density EFI adaptable to V-Twin?   Terry Kramer
    • [Diy_efi] Speed Density EFI adaptable to V-Twin?   Adam Wade
      • [Diy_efi] Speed Density EFI adaptable to V-Twin?   Terry Kramer
  • [Diy_efi] Speed Density EFI adaptable to V-Twin?   Gianmarco Rizzo BE/EAS
  • [Diy_efi] Speed Density EFI adaptable to V-Twin?   Adam Wade
• [Diy_efi] building an LS7   Steve Ravet
  • [Diy_efi] building an LS7   Rob Weinstock
  • [Diy_efi] building an LS7   Steve Ravet
    • [Diy_efi] Hardware for OBDII   FastFieros
  • [Diy_efi] building an LS7   Tomlinson, Brandon B.
    • [Diy_efi] building an LS7   Tyler Townsley
  • [Diy_efi] building an LS7   cobraman at insightbb.com
• [Diy_efi] Anyone know the status of the EFI332 TPU microcode?   Paul Helmuth
• [Diy_efi] Making a fake O2   Marcello A. Belloli
  • [Diy_efi] Making a fake O2   Bernd Felsche
  • [Diy_efi] Making a fake O2   Adam Wade
  • [Diy_efi] Making a fake O2   Joe Boucher
    • [Diy_efi] Making a fake O2   Phil Lamovie
      • [Diy_efi] Making a fake O2   Bret Levandowski
      • [Diy_efi] Making a fake O2   David Cooley
      • [Diy_efi] Making a fake O2   Bret Levandowski
  • [Diy_efi] Making a fake O2   Adam Wade
    • [Diy_efi] Making a fake O2   Marc Reviel
      • [Diy_efi] Making a fake O2   David Cooley
      • [Diy_efi] Making a fake O2   Marc Reviel
      • [Diy_efi] Making a fake O2   Marcello A. Belloli
      • [Diy_efi] Making a fake O2   Adam Wade
    • [Diy_efi] Making a fake O2   Joe Boucher
  • [Diy_efi] Making a fake O2   RogeranCarol
  • [Diy_efi] Making a fake O2   Adam Wade
    • [Diy_efi] Making a fake O2   David Cooley
  • [Diy_efi] Making a fake O2   Marcello A. Belloli
    • [Diy_efi] Making a fake O2   Mike
      • [Diy_efi] Making a fake O2   Bernd Felsche
  • [Diy_efi] Making a fake O2   Adam Wade
  • [Diy_efi] Making a fake O2   Adam Wade
    • [Diy_efi] Making a fake O2   David Cooley
      • [Diy_efi] Re: open loop maps MAY cause damage.   Phil Lamovie
      • [Diy_efi] Re: open loop maps MAY cause damage.   WSCowell at aol.com
      • [Diy_efi] Re: open loop maps MAY cause damage.   David Cooley
      • [Diy_efi] Re: open loop maps MAY cause damage.   J Creech
      • [Diy_efi] maps that are near perfect   Phil Lamovie
      • [Diy_efi] Re: open loop maps MAY cause damage.   Gianmarco Rizzo BE/EAS
  • [Diy_efi] Making a fake O2   Adam Wade
  • [Diy_efi] Making a fake O2   Adam Wade
    • [Diy_efi] Making a fake O2   David Cooley
      • [Diy_efi] Making a fake O2   Mike
      • [Diy_efi] Making a fake O2   Michael Stephens
      • [Diy_efi] Making a fake O2   Marcello A. Belloli
      • [Diy_efi] Making a fake O2   David Cooley
  • [Diy_efi] Making a fake O2   Adam Wade
    • [Diy_efi] Making a fake O2   David Cooley
      • [Diy_efi] Making a fake O2   Mike
      • [Diy_efi] Making a fake O2   Marcello A. Belloli
      • [Diy_efi] Making a fake O2   David Cooley
  • [Diy_efi] Making a fake O2   Gianmarco Rizzo BE/EAS
    • [Diy_efi] Making a fake O2   David Cooley
  • [Diy_efi] Making a fake O2   Steve Ravet
    • [Diy_efi] Making a fake O2   Daniel R. Nicoson
• [Diy_efi] don t send me letters   林 皇儒
• [Diy_efi] Faking O2 sensor - Bosch hardware   WSCowell at aol.com
  • [Diy_efi] Faking O2 sensor - Bosch hardware   rcjohnson4 at netscape.net
• [Diy_efi] Re: Diy_efi Digest, Vol 3, Issue 24   Nikola Radenkovic
  • [Diy_efi] Re: Diy_efi Digest, Vol 3, Issue 24   Gianmarco Rizzo BE/EAS

Last message date: Tue May 31 19:05:36 UTC 2005
Archived on: Fri Sep 4 00:30:47 UTC 2015

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...