October 2002 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Oct 1 13:19:48 GMT 2002
Ending: Thu Oct 31 05:15:37 GMT 2002
Messages: 270

• [Diy_efi] Back up.   Jon V
• [Diy_efi] EEC IV Engine swap   Joe Piche
• [Diy_efi] A/F metering   thomas.ericson at protech.se
• [Diy_efi] EEC IV Engine swap   Perry Harrington
• [Diy_efi] EEC IV Engine swap   Brian Renegar
• [Diy_efi] WB resistors   Doug. Allison
• [Diy_efi] data acquisition from engine with PC soundcard   Mike Diehl
• [Diy_efi] WB resistors   rr
• [Diy_efi] A/F metering   Shannen Durphey
• [Diy_efi] Aftermarket ecms...   Roger Anderson
• [Diy_efi] EEC IV Engine swap   Joe Piche
• [Diy_efi] Lookup Tables   Matt Donohoe
• [Diy_efi] Maintenance Downtime   Jon V
• [Diy_efi] Standard HEGO heater power question   dclark at zeiss.com
• [Diy_efi] Re: data acquisition from engine with PC soundcard   Mike Diehl
• [Diy_efi] Standard HEGO heater power question   Eric Fahlgren
• [Diy_efi] RE: data acquisition from engine with PC soundcard   Laird Tom N
• [Diy_efi] PWM frequency conversion   Derek
• [Diy_efi] What does the BLM work?   steve ravet
• [Diy_efi] (no subject)   Ivan Arnold
• [Diy_efi] DIY-WB and methanol   daveb at codyscafe.com
• [Diy_efi] DIY-WB and methanol   steve ravet
• [Diy_efi] DIY-WB and methanol   steve ravet
• [Diy_efi] Eprom Burning equipment question   Stephen Andersen
• [Diy_efi] Basics of GM BIN Writing?   bill.shurvinton at nokia.com
• [Diy_efi] PWM frequency conversion   Bevan Weiss
• [Diy_efi] Several basic questions from a newcomer to EFI   Merchant, Adnan
• [Diy_efi] WB-O2 with gasoline, nitrous and methanol...   daveb at codyscafe.com
• [Diy_efi] Injector Q at WOT   Bob Tom
• [Diy_efi] DIY-WB and methanol   Geddes, Brian J
• [Diy_efi] WB-O2 with gasoline, nitrous and methanol...   steve ravet
• [Diy_efi] DIY-WB and methanol   steve ravet
• [Diy_efi] Injector Q at WOT   Mike
• [Diy_efi] Eprom Burning equipment question   Merchant, Adnan
• [Diy_efi] EFI and heavy fuel (eg. Parafin )   Karl Doody
• [Diy_efi] WB-O2 with gasoline, nitrous and methanol...   Eck, Joel (Houston)
• [Diy_efi] WB-O2 with gasoline, nitrous and methanol...   Mike
• [Diy_efi] Re: DIY-WB and methanol   Marcell Gal
• [Diy_efi] WB-O2 with gasoline, nitrous and methanol...   Garfield Willis
• [Diy_efi] Eprom Burning equipment question   Djfreggens at aol.com
• [Diy_efi] WB-O2 with gasoline, nitrous and methanol...   steve ravet
• [Diy_efi] WB-O2 with gasoline, nitrous and methanol...   Garfield Willis
• [Diy_efi] PWM frequency conversion   Derek
• [Diy_efi] Engine ECM combination   Mike Turner/ENGR/HQ/KEMET/US
• [Diy_efi] Eprom Burning equipment question   Andrew Brownsword
• [Diy_efi] DIY-WB and methanol   Derek
• [Diy_efi] EFI and heavy fuel (eg. Parafin )   Tomas Sokorai Sch.
• [Diy_efi] PWM frequency conversion   bcroe at juno.com
• [Diy_efi] Several basic questions from a newcomer to EFI   Tlsalt at aol.com
• [Diy_efi] Engine ECM combination   Shannen Durphey
• [Diy_efi] RE: Engine ECM combination   Laird Tom N
• [Diy_efi] EFI and heavy fuel (eg. Parafin )   Ron Schroeder
• [Diy_efi] Basic exhaust KE question   Marc Reviel
• [Diy_efi] DIY-WB and methanol   Garfield Willis
• [Diy_efi] EFI and heavy fuel (eg. Parafin )   Greg Hermann
• [Diy_efi] EFI and heavy fuel (eg. Parafin )   Tomas Sokorai Sch.
• [Diy_efi] Basic exhaust KE question   Phil Lamovie
• [Diy_efi] What is stoichometric....really?   Derek
• [Diy_efi] Basic exhaust KE question   Greg Hermann
• [Diy_efi] EFI and heavy fuel (eg. Parafin )   MarkoNTL
• [Diy_efi] DIY-WB -temp   Jonathan Norman
• [Diy_efi] Basic exhaust KE question   Mike
• [Diy_efi] What is stoichometric....really?   steve ravet
• [Diy_efi] Bosch injector flow rate   WEG1192 at aol.com
• [Diy_efi] What is stoichometric....really?   john
• [Diy_efi] What is stoichometric....really?   Adam Wade
• [Diy_efi] DIY-WB -temp   Perry Harrington
• [Diy_efi] Fuel-injecting stratified charge combustion (Honda CVCC)   Dan D'Andrea
• [Diy_efi] Anybody want to buy a digital component tester? (Waketek LCR55)?   Xudong Yan
• [Diy_efi] Throttle body sizing   Dan D'Andrea
• [Diy_efi] Throttle body sizing   William Shurvinton
• [Diy_efi] Bosch Injector flow rates 80% or 100% duty ?   Karl Doody
• [Diy_efi] Basic exhaust KE question   Dave Williams
• [Diy_efi] Re: DIY-WB and methanol   Derek
• [Diy_efi] Throttle body sizing   Jeffrey Engel
• [Diy_efi] re Throttle body sizing   Dan D'Andrea
• [Diy_efi] Throttle body sizing   Ron Schroeder
• [Diy_efi] O2 sensor in the tailpipe?   Merchant, Adnan
• [Diy_efi] Throttle body sizing   arnie
• [Diy_efi] Bosch Injector flow rates 80% or 100% duty ?   William Shurvinton
• [Diy_efi] Basic exhaust KE question   William Shurvinton
• [Diy_efi] What is stoichometric....really?   Grant Beaty
• [Diy_efi] Engine ECM combination   Tom Sharpe
• [Diy_efi] re Throttle body sizing   William Shurvinton
• [Diy_efi] Re: DIY-WB and methanol   Garfield Willis
• [Diy_efi] Basic exhaust KE question   Bernd Felsche
• [Diy_efi] Bosch injector flow rate   labenzjl at cox.net
• [Diy_efi] Re: DIY-WB and methanol   Garfield Willis
• [Diy_efi] Throttle body sizing   Perry Harrington
• [Diy_efi] Basic exhaust KE question   Dave Williams
• [Diy_efi] re Throttle body sizing   arnie
• [Diy_efi] Throttle body sizing   William Shurvinton
• [Diy_efi] injector drivers   Santi Udomkesmalee
• [Diy_efi] Basic exhaust KE question   Mike
• [Diy_efi] What is stoichometric....really?   Derek
• [Diy_efi] Daewoo Nubira '99   Daniel Petrache
• [Diy_efi] Bosch Injector flow rates 80% or 100% duty ?   Karl Doody
• [Diy_efi] Basic exhaust KE question   William Shurvinton
• [Diy_efi] DIY-WB question   Mario Piquero
• [Diy_efi] What is stoichometric....really?   Phil Lamovie
• [Diy_efi] Tach sensing ?   c fu
• [Diy_efi] Basic exhaust KE question   A6intruder
• [Diy_efi] Basic exhaust KE question   William Shurvinton
• [Diy_efi] re Throttle body sizing   William Shurvinton
• [Diy_efi] DIY-WB question   bcroe at juno.com
• [Diy_efi] injector drivers   Jeffrey Engel
• [Diy_efi] What is stoichometric....really?   Mike
• [Diy_efi] Throttle body sizing   Le Chevalier noir
• [Diy_efi] DIY-WB question   dclark at zeiss.com
• [Diy_efi] sequential logic   Bino Lardo
• [Diy_efi] Basic exhaust KE question   Heath, Tom
• [Diy_efi] What is stoichometric....really?   Heath, Tom
• [Diy_efi] sequential logic   steve ravet
• [Diy_efi] about O2 sensor.   jichao.yu at eyou.com
• [Diy_efi] sequential logic   jay zumwalt
• [Diy_efi] DIY-WB question   Garfield Willis
• [Diy_efi] where i can find schematic for reluctor interface   Daniel.Maszkowski at nokia.com
• [Diy_efi] What is stoichometric....really?   Phil Lamovie
• [Diy_efi] Intake pipe sizing   Grant Beaty
• [Diy_efi] What is stoichometric....really?   Grant Beaty
• [Diy_efi] re Throttle body sizing   Dave Dahlgren
• [Diy_efi] A/F metering   Steve Spiers
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Jeffrey Engel
• [Diy_efi] W-B question   Don Maloney
• [Diy_efi] Intake pipe sizing   Eric Fahlgren
• [Diy_efi] where i can find schematic for reluctor interface   Perry Harrington
• [Diy_efi] about LM9044   jichao.yu at eyou.com
• [Diy_efi] DIY-WB question   allen brown
• [Diy_efi] DIY-WB question   A6intruder
• [Diy_efi] W-B question   A6intruder
• [Diy_efi] What is stoichometric....really?   Mike
• [Diy_efi] DIY_WB threads   steve ravet
• [Diy_efi] DIY-WB question   Garfield Willis
• [Diy_efi] DIY-WB question   Garfield Willis
• [Diy_efi] DIY-WB question   Klaus Allmendinger
• [Diy_efi] re Throttle body sizing   William Shurvinton
• [Diy_efi] Throttle body sizing   William Shurvinton
• [Diy_efi] W-B question   bcroe at juno.com
• [Diy_efi] Intake pipe sizing   Grant Beaty
• [Diy_efi] DIY-WB question   bcroe at juno.com
• [Diy_efi] Dodge stuff...sorry...no GM content   Programmer
• FW: [Diy_efi] DIY-WB question   Daniel R. Nicoson
• [Diy_efi] DIY_WB threads   jay zumwalt
• [Diy_efi] DIY-WB question   Garfield Willis
• [Diy_efi] DIY-WB question   bcroe at juno.com
• [Diy_efi] Inbuilt mosfet zener to clamp injectors   Tony Bryant
• [Diy_efi] Tuning 101   Mark Szutta
• [Diy_efi] CDI coil question   Rausch, Bernd
• [Diy_efi] DIY-WB question   Ron Schroeder
• [Diy_efi] Tuning 101   steve ravet
• [Diy_efi] CDI coil question   Adam Wade
• [Diy_efi] DIY-WB -- Rcal vs. Ip samples   Peter Gargano
• [Diy_efi] DIY-WB question   Hugh Keir
• [Diy_efi] Harley Davidson ion sensing ignition   Phil Hunter
• [Diy_efi] Tuning 101   r71chevy at earthlink.net
• [Diy_efi] Tuning 101   bill.shurvinton at nokia.com
• [Diy_efi] CDI coil question   Bevan Weiss
• [Diy_efi] CDI coil question   Andrew Theurer
• [Diy_efi] Inbuilt mosfet zener to clamp injectors   Bevan Weiss
• [Diy_efi] Honda wideband sensor   Gary Fink
• [Diy_efi] CDI coil question   Eck, Joel (Houston)
• [Diy_efi] Tachometer - Bit off topic but maybe somebody can help?   Matt Donohoe
• [Diy_efi] What is stoichometric....really?   Phil Lamovie
• [Diy_efi] Inbuilt mosfet zener to clamp injectors   Mike
• [Diy_efi] DIY-WB question   sy2th
• [Diy_efi] What is stoichometric....really?   Derek
• [Diy_efi] Harley Davidson ion sensing ignition   Adam Wade
• [Diy_efi] CDI coil question   Adam Wade
• AW: [Diy_efi] CDI coil question   Rausch, Bernd
• [Diy_efi] CDI coil question   Adam Wade
• [Diy_efi] lsu 4 sensor   Shlomi Shraga
• [Diy_efi] What is stoichometric....really?   Phil Lamovie
• [Diy_efi] Harley Davidson ion sensing ignition   Phil Hunter
• [Diy_efi] lsu 4 sensor   Peter Gargano
• [Diy_efi] DIY-WB -- Rcal vs. Ip samples   Garfield Willis
• [Diy_efi] lsu 4 sensor   J?rgen Karlsson
• [Diy_efi] which chips in piggy back ECU   Alexei Pavlov
• [Diy_efi] What is stoichometric....really?   Mike
• [Diy_efi] New to list, have a question about speed density and turbos   Startled Jackrabbit
• [Diy_efi] a/f #s, was What is stoichometric....really?   Grant Beaty
• [Diy_efi] New to list, have a question about speed density and turbos   Adam Wade
• [Diy_efi] DIY-WB -- Rcal vs. Ip samples   William Shurvinton
• [Diy_efi] New member question on PC integration   Sharif Khan
• [Diy_efi] What is stoichometric....really?   Garfield Willis
• [Diy_efi] New to list, have a question about speed density and turbos   A6intruder
• [Diy_efi] New to list, have a question about speed density   sy2th
• [Diy_efi] Harley Davidson ion sensing ignition   Adam Wade
• [Diy_efi] DIY-EFI References : EMP hardening   A6intruder
• [Diy_efi] Re: Diy_efi digest, Vol 1 #322 - 11 msgs   Bill Washington
• [Diy_efi] DIY-EFI References : EMP hardening   William Shurvinton
• [Diy_efi] New to list, have a question about speed density and turbos   Dan D'Andrea
• [Diy_efi] New to list, have a question about speed density   Mike
• [Diy_efi] DIY-EFI References : EMP hardening   Mike
• [Diy_efi] What is stoichometric....really?   Mike
• [Diy_efi] DIY-WB -- Rcal vs. Ip samples   Garfield Willis
• [Diy_efi] RE: RE: New to list, have a question about speed density and turbos   Startled Jackrabbit
• [Diy_efi] New to list, have a question about speed density and turbos   Adam Wade
• [Diy_efi] (no subject)   gary king
• [Diy_efi] RE: RE: New to list, have a question about speed   sy2th
• [Diy_efi] DIY-EFI References : EMP hardening   Don Sauman
• [Diy_efi] DIY-EFI References : EMP hardening   kd694j0538f at hotmail.com
• [Diy_efi] Jitter Filter for 36 LED bar graph display   bcroe at juno.com
• [Diy_efi] New to list, have a question about speed density   Mike
• [Diy_efi] New to list, have a question about speed density and turbos   Eric D Byrd
• [Diy_efi] Newbie with a simplified Motronic project   Kyle Schwulst
• [Diy_efi] TPS or MAP Sensor ?   Karl Doody
• [Diy_efi] TPS or MAP Sensor ?   Rene Pedersen
• [Diy_efi] Questions regarding odd coil-per-plug coils....   gerard
• [Diy_efi] TPS or MAP Sensor ?   bcroe at juno.com
• [Diy_efi] TPS or MAP Sensor ?   Derek
• [Diy_efi] TPS or MAP Sensor ?   Adam Wade
• [Diy_efi] Bosch L-Jetronic Trouble   Mike Sharp
• [Diy_efi] Bosch L-Jetronic Trouble   kd694j0538f at hotmail.com
• [Diy_efi] Bosch L-Jetronic Trouble   Jeffrey Engel
• [Diy_efi] Re: Question about speed density, etc.   Startled Jackrabbit
• [Diy_efi] Bosch L-Jetronic Trouble   Adam Wade
• [Diy_efi] Bosch L-Jetronic Trouble   Allyn
• [Diy_efi] Newbie with a simplified Motronic project   Eric D Byrd
• [Diy_efi] Questions regarding odd coil-per-plug coils....   Bob Valentine
• [Diy_efi] Bosch DME trouble...   Mike Sharp
• [Diy_efi] Gems EM20 Software. For Rene.   Karl Doody
• [Diy_efi] Bosch DME trouble...   Adam Wade
• [Diy_efi] Bosch DME trouble...   kd694j0538f at hotmail.com
• [Diy_efi] Newbie with a simplified Motronic project   arnie
• [Diy_efi] Questions regarding odd coil-per-plug coils....   gerard
• [Diy_efi] Re: Question about speed density, etc.   arnie
• [Diy_efi] Bosch DME trouble...   Richard Wakeling
• [Diy_efi] Re: Question about speed density, etc.   Eric D Byrd
• [Diy_efi] Re: Question about speed density, etc.   Adam Wade
• [Diy_efi] How would I calculate the mass of the air w/ only IAT and MAP?   Kyle Schwulst
• [Diy_efi] Bosch L-Jetronic Trouble   Mike Sharp
• [Diy_efi] Gems EM20 Software. For Rene.   Rene Pedersen
• [Diy_efi] seeking Arlan Walker   steve ravet
• [Diy_efi] injector bungs and Fredric Breitweiser   Andris Skulte
• [Diy_efi] 4.0 jeep ECU info?   Tomas Sokorai Sch.
• [Diy_efi] Re: Question about speed density, etc.   Adam Wade
• [Diy_efi] How would I calculate the mass of the air w/ only IAT and MAP?   Adam Wade
• [Diy_efi] Re: Where to get 36531-P07-003 sensor   gerard
• [Diy_efi] Re: Question about speed density, etc.   Eric D Byrd
• [Diy_efi] Re: Question about speed density, etc.   Erik Jacobs
• [Diy_efi] Intake manifold design   Merchant, Adnan
• [Diy_efi] Re: Where to get 36531-P07-003 sensor   Mark Romans
• [Diy_efi] Re: Question about speed density, etc.   Startled Jackrabbit
• [Diy_efi] How would I calculate the mass of the air w/ only IAT and   Brian Dessent
• [Diy_efi] Newbie with a simplified Motronic project   arnie
• [Diy_efi] Re: Question about speed density, etc.   truE
• [Diy_efi] Re: Where to get 36531-P07-003 sensor(WideBand O2)   K.Mims
• [Diy_efi] idle controller   Marc M. Thomas
• [Diy_efi] Re: Question about speed density, etc.   arnie
• [Diy_efi] How would I calculate the mass of the air w/ only IAT and   Brian Dessent
• [Diy_efi] Re: Question about speed density, etc.   arnie
• [Diy_efi] Re: Diy_efi digest, Vol 1 #327 - Dying Porsche   Bill Washington
• [Diy_efi] Newbie with a simplified Motronic project   Eric D Byrd
• [Diy_efi] Knock sensor Q   Grant Beaty
• [Diy_efi] Re: Question about speed density, etc.   Dave Dahlgren
• [Diy_efi] Bosch L-Jetronic Trouble   Adam Wade
• [Diy_efi] Re: Where to get 36531-P07-003 sensor(WideBand   sy2th
• [Diy_efi] Intake manifold design   Bernd Felsche
• [Diy_efi] Re: Question about speed density, etc.   Eric D Byrd
• [Diy_efi] Re: Question about speed density, etc.   Brian Dessent
• [Diy_efi] Re: Question about speed density, etc.   Adam Wade
• [Diy_efi] Newbie with a simplified Motronic project   Adam Wade
• [Diy_efi] Re: Where to get 36531-P07-003 sensor   K.Mims
• [Diy_efi] New to list, have a question about speed density and turbos   Eric D Byrd
• [Diy_efi] New to list, have a question about speed density and   steve ravet
• [Diy_efi] Re: Question about speed density, etc.   Adam Wade
• [Diy_efi] Newbie with a simplified Motronic project   arnie
• [Diy_efi] Re: Question about speed density, etc.   arnie
• [Diy_efi] New to list, have a question about speed density and turbos   Eck, Joel (Houston)
• [Diy_efi] Knock sensor Q   Justin Starkey at VMP

Last message date: Thu Oct 31 05:15:37 GMT 2002
Archived on: Thu May 30 06:02:48 GMT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...